S&M Young Researcher Paper Award 2020
Recipients: Ding Jiao, Zao Ni, Jiachou Wang, and Xinxin Li [Winner's comments]
Paper: High Fill Factor Array of Piezoelectric Micromachined
Ultrasonic Transducers with Large Quality Factor

S&M Young Researcher Paper Award 2021
Award Criteria
Notice of retraction
Vol. 32, No. 8(2), S&M2292

Print: ISSN 0914-4935
Online: ISSN 2435-0869
Sensors and Materials
is an international peer-reviewed open access journal to provide a forum for researchers working in multidisciplinary fields of sensing technology.
Sensors and Materials
is covered by Science Citation Index Expanded (Clarivate Analytics), Scopus (Elsevier), and other databases.

Instructions to authors
English    日本語

Instructions for manuscript preparation
English    日本語

Template
English

Publisher
 MYU K.K.
 Sensors and Materials
 1-23-3-303 Sendagi,
 Bunkyo-ku, Tokyo 113-0022, Japan
 Tel: 81-3-3827-8549
 Fax: 81-3-3827-8547

MYU Research, a scientific publisher, seeks a native English-speaking proofreader with a scientific background. B.Sc. or higher degree is desirable. In-office position; work hours negotiable. Call 03-3827-8549 for further information.


MYU Research

(proofreading and recording)


MYU K.K.
(translation service)


The Art of Writing Scientific Papers

(How to write scientific papers)
(Japanese Only)

Sensors and Materials, Volume 32, Number 12(3) (2020)
Copyright(C) MYU K.K.
pp. 4201-4216
S&M2405 Research Paper of Special Issue
https://doi.org/10.18494/SAM.2020.3099
Published: December 22, 2020

Development of Reconfigurable Five-axis Machine Tool Using OPEN Computer Numerical Control System Integration Architecture [PDF]

Yuan-Ming Cheng and Mu-Sheng Lin

(Received July 7, 2020; Accepted November 2, 2020)

Keywords: parallel mechanism, five-axis machine tool, OPEN CNC, postprocessing

The purpose of this study is to use an OPEN computer numerical control (CNC) system to develop a reconfigurable five-axis machine tool (RFMT) for system integration research. The RFMT is mainly composed of a three-degree-of-freedom (3DOF) parallel platform and an X–Y table. In the study, the human–machine interface of OPEN CNC was written, and the programmable logic controller (PLC) architecture of OPEN CNC is used to control three-axis simultaneous movement or individual drives. The processing path of this study uses a postprocessing program to transfer the numerical control (NC) code with five-axis machining software, and the Z, α, and β values of the NC program are used to convert each axis value of a three-axis motion platform by inverse kinematics. Finally, rough and finishing methods are used to cut a concave circle to verify the accuracy of RFMT.

Corresponding author: Yuan-Ming Cheng


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Cite this article
Yuan-Ming Cheng and Mu-Sheng Lin, Development of Reconfigurable Five-axis Machine Tool Using OPEN Computer Numerical Control System Integration Architecture, Sens. Mater., Vol. 32, No. 12, 2020, p. 4201-4216.



Forthcoming Regular Issues


Forthcoming Special Issues

7th Special Issue on the Workshop of Next-generation Front-edge Optical Science Research
Guest editor, Yutaka Fujimoto (Tohoku University) and Takayuki Yanagida (Nara Institute of Science and Technology)


Special issue on Novel Materials and Sensing Technologies on Electronic and Mechanical Devices Part 4(2)
Guest editor, Teen-Hang Meen (National Formosa University), Wenbing Zhao (Cleveland State University), and Hsien-Wei Tseng (Yango University)


Special Issue on Artificial Intelligence and Advanced Technologies for Power and Renewable Energy Systems from IS3C2020
Guest editor, Shiue Der Lu , Meng Hui Wang, Kuei Hsiang Chao, and Her Terng Yau (National Chin-Yi University of Technology) (deadline extended to 28 Feb. 2021)
Conference website
Call for paper


Special Issue on the International Multi-Conference on Engineering and Technology Innovation 2020 (IMETI2020)
Guest editor, Wen-Hsiang Hsieh (National Formosa University)
Conference website


Special Issue on Human-in-the-loop Sensing in Cognitive Robotic Systems
Guest editor, Weiwei Wan (Osaka University), Yiming Jiang (Hunan University), and Daolin Ma (MIT)
Call for paper


Special Issue on Sensing and Data Analysis Technologies for Living Environment, Health Care, Production Management and Engineering/Science Education Applications: Part 2
Guest editor, Chien-Jung Huang (National University of Kaohsiung), Rey-Chue Hwang (I-Shou University), Ja-Hao Chen (Feng Chia University), Ba-Son Nguyen (Research Center for Applied Sciences)
Call for paper


Copyright(C) MYU K.K. All Rights Reserved.