Notice of retraction
Vol. 32, No. 8(2), S&M2292

ISSN (print) 0914-4935
ISSN (online) 2435-0869
Sensors and Materials
is an international peer-reviewed open access journal to provide a forum for researchers working in multidisciplinary fields of sensing technology.
Sensors and Materials
is covered by Science Citation Index Expanded (Clarivate Analytics), Scopus (Elsevier), and other databases.

Instructions to authors
English    日本語

Instructions for manuscript preparation
English    日本語

Template
English

Publisher
 MYU K.K.
 Sensors and Materials
 1-23-3-303 Sendagi,
 Bunkyo-ku, Tokyo 113-0022, Japan
 Tel: 81-3-3827-8549
 Fax: 81-3-3827-8547

MYU Research, a scientific publisher, seeks a native English-speaking proofreader with a scientific background. B.Sc. or higher degree is desirable. In-office position; work hours negotiable. Call 03-3827-8549 for further information.


MYU Research

(proofreading and recording)


MYU K.K.
(translation service)


The Art of Writing Scientific Papers

(How to write scientific papers)
(Japanese Only)

Copyright(C) MYU K.K.

High-isolation Double-pole-double-throw Switch with Eighth-wavelength Transmission Lines for Wireless Sensors

Si-Da Tang and Kai-Li Wang

(Received February 9, 2020; Accepted August 28, 2020)

Keywords: DPDT, eighth-wavelength, high isolation, switch

In this paper, we present the implementation of a novel structure of a double-pole-double-throw (DPDT) switch with eighth-wavelength transmission lines. The switch consists of eight diodes, eight eighth-wavelength transmission lines, and four frequency-optimized matching lines. It can be used as a single-pole-double-throw (SPDT) switch when one of the ports is terminated with 50 Ω characteristic impedance to the ground. By using eighth-wavelength transmission lines, the isolation of the switch is highly improved. The performances of the traditional quarter-wavelength SPDT and DPDT have also been evaluated for comparison with the proposed design. Measured results show that the insertion loss reaches as high as 1.65 dB, and the isolation is 30 dB at a frequency of 2.4 GHz. Meanwhile, the size of the switch is nearly the same as that of the conventional quarter-wavelength DPDT switch. This novel switch can be used in wireless sensor applications.

Corresponding author: Si-Da Tang




Forthcoming Regular Issues


Forthcoming Special Issues

Special Issue on Geomatics Technologies for the Realization of Smart Cities (1)
Guest editor, He Huang and XiangLei Liu (Beijing University of Civil Engineering and Architecture)


Special Issue on International Conference on BioSensors, BioElectronics, BioMedical Devices, BioMEMS/NEMS and Applications 2019 (Bio4Apps 2019) (1)
Guest editor, Hirofumi Nogami and Masaya Miyazaki (Kyushu University)
Conference website


Special Issue on Optical Sensors: Novel Materials, Approaches, and Applications
Guest editor, Yap Wing Fen (Universiti Putra Malaysia)


Special Issue on Intelligent Sensing Control Analysis, Optimization, and Automation (2)
Guest editor, Cheng-Chi Wang (National Chin-Yi University of Technology)


Special Issue on Geomatics Technologies for the Realization of Smart Cities (2)
Guest editor, He Huang and XiangLei Liu (Beijing University of Civil Engineering and Architecture)


Special Issue on Materials, Devices, Circuits, and Analytical Methods for Various Sensors (4)
Guest editor, Chien-Jung Huang (National University of Kaohsiung), Cheng-Hsing Hsu (National United University), Ja-Hao Chen (Feng Chia University), and Wei-Ling Hsu (Huaiyin Normal University)
Conference website


Copyright(C) MYU K.K. All Rights Reserved.