Young Researcher Paper Award 2023
🥇Winners

Notice of retraction
Vol. 34, No. 8(3), S&M3042

Notice of retraction
Vol. 32, No. 8(2), S&M2292

Print: ISSN 0914-4935
Online: ISSN 2435-0869
Sensors and Materials
is an international peer-reviewed open access journal to provide a forum for researchers working in multidisciplinary fields of sensing technology.
Sensors and Materials
is covered by Science Citation Index Expanded (Clarivate Analytics), Scopus (Elsevier), and other databases.

Instructions to authors
English    日本語

Instructions for manuscript preparation
English    日本語

Template
English

Publisher
 MYU K.K.
 Sensors and Materials
 1-23-3-303 Sendagi,
 Bunkyo-ku, Tokyo 113-0022, Japan
 Tel: 81-3-3827-8549
 Fax: 81-3-3827-8547

MYU Research, a scientific publisher, seeks a native English-speaking proofreader with a scientific background. B.Sc. or higher degree is desirable. In-office position; work hours negotiable. Call 03-3827-8549 for further information.


MYU Research

(proofreading and recording)


MYU K.K.
(translation service)


The Art of Writing Scientific Papers

(How to write scientific papers)
(Japanese Only)

Sensors and Materials, Volume 30, Number 1 (2018)
Copyright(C) MYU K.K.
pp. 111-118
S&M1477 Research Paper
https://doi.org/10.18494/SAM.2018.1640
Published: January 12, 2018

Dependence of Reflection Wavelength Shift of Resin-embedded Grating Fiber on Resin Material [PDF]

Hironori Kumazaki, Takato Sugiyama, and Hisakazu Oguri

(Received May 25, 2017; Accepted August 29, 2017)

Keywords: fiber Bragg grating, reactive ion etching, bending deflection sensor

The dependence of the center reflection wavelength shift of a resin-embedded fiber Bragg grating (FBG) on the resin material was investigated for the use of the grating fiber as a bending deflection sensor (4 × 8 × 40 mm3). The reflection center wavelength for an FBG embedded in acrylic adhesive shifted linearly by up to 3.1 nm owing to the deflection caused by a bend feeder displacement of 1.2 mm. These wavelength shifts were approximately 60 times larger than those for an etched FBG with one side of the cladding etched to within 11 µm of the core and 33 times larger than those for an FBG embedded in a modified silicon adhesive. These results depend primarily on Young's modulus of the resin material used to embed the FBG.

Corresponding author: Hironori Kumazaki


Cite this article
Hironori Kumazaki, Takato Sugiyama, and Hisakazu Oguri, Dependence of Reflection Wavelength Shift of Resin-embedded Grating Fiber on Resin Material, Sens. Mater., Vol. 30, No. 1, 2018, p. 111-118.



Forthcoming Regular Issues


Forthcoming Special Issues

Applications of Novel Sensors and Related Technologies for Internet of Things
Guest editor, Teen-Hang Meen (National Formosa University), Wenbing Zhao (Cleveland State University), and Cheng-Fu Yang (National University of Kaohsiung)
Call for paper


Special Issue on Advanced Data Sensing and Processing Technologies for Smart Community and Smart Life
Guest editor, Tatsuya Yamazaki (Niigata University)
Call for paper


Special Issue on Advanced Sensing Technologies and Their Applications in Human/Animal Activity Recognition and Behavior Understanding
Guest editor, Kaori Fujinami (Tokyo University of Agriculture and Technology)
Call for paper


Special Issue on International Conference on Biosensors, Bioelectronics, Biomedical Devices, BioMEMS/NEMS and Applications 2023 (Bio4Apps 2023)
Guest editor, Dzung Viet Dao (Griffith University) and Cong Thanh Nguyen (Griffith University)
Conference website
Call for paper


Special Issue on Piezoelectric Thin Films and Piezoelectric MEMS
Guest editor, Isaku Kanno (Kobe University)
Call for paper


Special Issue on Advanced Micro/Nanomaterials for Various Sensor Applications (Selected Papers from ICASI 2023)
Guest editor, Sheng-Joue Young (National United University)
Conference website
Call for paper


Copyright(C) MYU K.K. All Rights Reserved.